Fix Your Stuff Community Store

Protocol DURA VR Remote Power Button Replacement

Introduction

In this replacement guide you will learn the steps to replace the power button on your Protocol DURA VR drone remote.

What you need

  1. Protocol DURA VR Remote Power Button Replacement, Remote Power Button: step 1, image 1 of 2 Protocol DURA VR Remote Power Button Replacement, Remote Power Button: step 1, image 2 of 2

    • Remove the four 0.8mm Phillips #0 screws from the back casing of the remote.

    Edit

  2. Protocol DURA VR Remote Power Button Replacement: step 2, image 1 of 2 Protocol DURA VR Remote Power Button Replacement: step 2, image 2 of 2

    • Remove the three 0.7mm Phillips #0 screws from the motherboard.

    Edit

  4. Protocol DURA VR Remote Power Button Replacement: step 3, image 1 of 2 Protocol DURA VR Remote Power Button Replacement: step 3, image 2 of 2

    • Move the motherboard up to allow room for the power bottom to become visible and loose.

    Edit

  5. Protocol DURA VR Remote Power Button Replacement: step 4, image 1 of 1

    • Place the remote face up. Then pick up the broken power button and replace with a new button.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 3 other contributors

Kayla Brown

Member since: 03/22/18

491 Reputation

4 Guides authored

Badges: 8

+5 more badges

Team

Sam Houston State, Team S17-G5, Blackburne Spring 2018 Member of Sam Houston State, Team S17-G5, Blackburne Spring 2018

SHSU-BLACKBURNE-S18S17G5

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 4

All Time: 161