Skip to main content

Introduction

In this guide you will learn how to remove and replace the top two propellor blades of the Gyro-X. This is a common procedure, because crashing your Gyro-X will often result in propellor damage. To remove the propellors you will only need to remove 4 small screws. Be careful not to lose these after removal.

Parts

No parts specified.

  1. Stabilizing links are easy to break. Be gentle when prying them off.
    • Stabilizing links are easy to break. Be gentle when prying them off.

    • Place the tweezers on the sides of the links and pull straight away from the top point of connection.

  2. PC Laptop Batteries

    An easy fix for a big power boost.

    Shop Now

    PC Laptop Batteries

    An easy fix for a big power boost.

    Shop Now
  3. Remove the two 6.0 mm Phillips #00 screws from the rotors. Remove the two 6.0 mm Phillips #00 screws from the rotors.
    • Remove the two 6.0 mm Phillips #00 screws from the rotors.

  4. Pull the rotors away from the mounting brackets. Pull the rotors away from the mounting brackets.
    • Pull the rotors away from the mounting brackets.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Sarah Atmadja

Member since: 04/09/2015

377 Reputation

3 Guides authored

Team

Cal Poly, Team 17-2, Forte Spring 2015 Member of Cal Poly, Team 17-2, Forte Spring 2015

CPSU-FORTE-S15S17G2

4 Members

7 Guides authored

One Comment

Does any one know where I can buy a stabilizing link?

William M - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 899