Introduction

This guide will help you to replace the joysticks in the remote controller for your Gyro-X. You may need to do this if you dropped the remote and broke or jammed the joysticks. The many screws holding the remote case together are set deep in the case, so you will need a long, narrow screw driver to remove them.

Parts

No parts required.

Image 1/1:
  • Remove the six Phillips #0 screws from the back of the remote.

Add Comment

Image 1/1:
  • With the joysticks facing up, lift up the top of the remote casing to remove it.

Add Comment

Image 1/1:
  • While holding the remote down with one hand, pull the joystick up with the other hand to remove it.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ashton Demaree

Member since: 04/09/2015

250 Reputation

2 Guides authored

Team

Cal Poly, Team 17-2, Forte Spring 2015 Member of Cal Poly, Team 17-2, Forte Spring 2015

CPSU-FORTE-S15S17G2

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 11

All Time: 316