Introduction
In order to help others open their scale without damage.
I opened mine because of water damage. Unfortunately the lower part of the led display doesn't work anymore
-
-
-
On the bottom there's a sticker. Under this sticker you'll find two screws which hold the plateau. Unscrew these screws. After removing the plateau you'll see four phillips head screws on the inside of the ring. Remove these and the two identical screws at the bottom. After that you can seperate the bottom and top plastic parts to reach the inside.
Ask FixBot
-
-
-
Special thanks to these translators:
nl en
100%
Edwin is helping us fix the world! Want to contribute?
Start translating ›
