Introduction

If the speaker has stopped working, and you replaced the batteries, then this one way you can fix the speaker. There are no hazards or special requirements for this guide.

Parts

No parts required.

  1. Use a Phillips #0 screwdriver to remove every screw on the back of the wand. Use a Phillips #0 screwdriver to remove every screw on the back of the wand.
    • Use a Phillips #0 screwdriver to remove every screw on the back of the wand.

  2. Next, gently open the wand.
    • Next, gently open the wand.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Locate the speaker at the bottom of the wand, and take it out.
    • Locate the speaker at the bottom of the wand, and take it out.

  5. Desolder the speaker wires from the terminals on the speaker.
    • Desolder the speaker wires from the terminals on the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Samantha

Member since: 06/01/2016

131 Reputation

1 Guide authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 12

All Time: 230