Skip to main content

Introduction

Replacing this keyboard is easy. It requires no tools, and takes only a few minutes.

Tools

No tools specified.

  1. PowerBook G4 Titanium Onyx Keyboard Replacement, Keyboard: step 1, image 1 of 1
    • Remove the battery.

    • Turn the keyboard locking screw so that it is parallel to the space bar.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  2. PowerBook G4 Titanium Onyx Keyboard Replacement: step 2, image 1 of 1
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  3. PowerBook G4 Titanium Onyx Keyboard Replacement: step 3, image 1 of 1
    • Your laptop should look approximately like this.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Attached Documents

iRobot

Member since: 09/24/2009

1 Reputation

646 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 7

All Time: 4,973