Introduction

Install an Airport Extreme 802.11g card internally.

Use a coin to turn the battery locking screw 90 degrees to the right.
  • Use a coin to turn the battery locking screw 90 degrees to the right.

  • Lift the battery out of the computer.

Add Comment

Flip down the door on the right side of the battery compartment.
  • Flip down the door on the right side of the battery compartment.

Add Comment

Use a spudger to disconnect the Airport antenna from the card.
  • Use a spudger to disconnect the Airport antenna from the card.

Add Comment

Grasp the plastic tab and pull the card out all the way.
  • Grasp the plastic tab and pull the card out all the way.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

11 other people completed this guide.

Attached Documents

iRobot

Member since: 09/24/2009

1 Reputation

725 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 10,391