1. Remove the Ni-Cad battery from the PowerBook 180.
    • Remove the Ni-Cad battery from the PowerBook 180.

    • Slide the arrows toward the front of the computer until the battery can slide out.

    Add Comment

  2. Removing the screws securing the bottom plate from the PowerBook 180.
    • Removing the screws securing the bottom plate from the PowerBook 180.

    • There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.

    Add Comment

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Your computer should look like the two pictures after the bottom plate is removed.

    Add Comment

    • Locate the modem board, which is next to the DC-in port.

    • There are two Torx T8 screws marked in red in the pictures. Remove these screws and pull up on the modem board to remove.

    • To reassemble your PowerBook, follow these instructions in reverse.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Jack Byrnes

Member since: 10/17/2010

1,160 Reputation

2 Guides authored

Team

Master Techs Member of Master Techs

Community

278 Members

756 Guides authored

One Comment

Great guide. Worked for me of the Powerbook 140. Thanks!

Jack - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 988