Fix Your Stuff Community Store

PowerA Spectra Infinity Enhanced Bumpers Replacement

Introduction

Use this guide to replace the bumpers of a Power A Spectra Infinity Enhanced Xbox controller.


The bumpers may need to be replaced if they no longer press down, get stuck, or do not provide imput to the controller when plugged in. Please ensure that the controller is not plugged in before taking it apart.

What you need

  1. PowerA Spectra Infinity Enhanced Bumpers Replacement, Motherboard: step 1, image 1 of 2 PowerA Spectra Infinity Enhanced Bumpers Replacement, Motherboard: step 1, image 2 of 2

    • Flip the controller so the back is facing up.

    Edit

  2. PowerA Spectra Infinity Enhanced Bumpers Replacement: step 2, image 1 of 1

    • Remove the eight 10 mm screws from the back of the controller using a Phillips #0 screwdriver.

    Edit

  3. PowerA Spectra Infinity Enhanced Bumpers Replacement: step 3, image 1 of 2 PowerA Spectra Infinity Enhanced Bumpers Replacement: step 3, image 2 of 2

    • Unlock the trigger locks before removing the backplate.

    • This will make taking the plate off easier.

    • Use your fingers and carefully remove the backplate.

    Edit

  5. PowerA Spectra Infinity Enhanced Bumpers Replacement: step 4, image 1 of 1

    • Remove the two 10 mm screws connecting the motherboard to the faceplate using a Phillips #0 screwdriver.

    Edit

  6. PowerA Spectra Infinity Enhanced Bumpers Replacement: step 5, image 1 of 2 PowerA Spectra Infinity Enhanced Bumpers Replacement: step 5, image 2 of 2

    • Use your hand to separate the motherboard from the face plate.

    Edit

  7. PowerA Spectra Infinity Enhanced Bumpers Replacement, Bumpers: step 6, image 1 of 1

    • Remove two 10 mm screws holding the bumper to the faceplate using a Phillips #0 screwdriver.

    Edit

  8. PowerA Spectra Infinity Enhanced Bumpers Replacement: step 7, image 1 of 2 PowerA Spectra Infinity Enhanced Bumpers Replacement: step 7, image 2 of 2

    • Remove the single 7.9 mm screw holding the bumpers to the faceplate using a Phillips #0 screwdriver.

    Edit

  9. PowerA Spectra Infinity Enhanced Bumpers Replacement: step 8, image 1 of 1

    • Remove the freed bumpers from the faceplate.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 2 other contributors

Kevyn Jorge

Member since: 03/22/24

1,012 Reputation

6 Guides authored

Badges: 11

+8 more badges

Team

UMass Dartmouth, Team 6-5, Botvin Spring 2024 Member of UMass Dartmouth, Team 6-5, Botvin Spring 2024

UMASSD-BOTVIN-S24S6G5

3 Members

6 Guides authored

2 Guide Comments

okay but where can I get a replacement part from, I've spent ages looking and cant find one anywhere

Tom Radda - Reply

Do you sell replacement parts?

Everett - Reply

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 35

Past 30 Days: 97

All Time: 1,502