Fix Your Stuff Community Store

PowerA Spectra Controller Rear Case Replacement

Introduction

When the backplate is broken, it must be replaced to avoid a safety hazard. It may also be switched out if customization is wanted. This guide shows how to replace the backplate.

What you need

  1. PowerA Spectra Controller Rear Case Replacement, Rear Case: step 1, image 1 of 1

    • Flip the controller over so the backplate is facing up.

    Edit

  3. PowerA Spectra Controller Rear Case Replacement: step 2, image 1 of 1

    • Use a Phillips #2 screwdriver to remove the eight 7.8 mm screws that secure the rear case.

    Edit

  4. PowerA Spectra Controller Rear Case Replacement: step 3, image 1 of 1

    • Hold the front case in one hand and pull the rear case off.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 6

All Time: 108