Introduction

The headphone jack allows you to listen while you play without disturbing others. Learn how to replace it with this guide.

Remove the (9) nine 9.2mm screws with a JIS #1 screwdriver. Remove the two bottom plastic grip covers. Remove the two bottom plastic grip covers.
  • Remove the (9) nine 9.2mm screws with a JIS #1 screwdriver.

  • Remove the two bottom plastic grip covers.

Add Comment

Remove the (2) two 9.2mm screws with a JIS #1 screwdriver. Remove the back cover of the controller.
  • Remove the (2) two 9.2mm screws with a JIS #1 screwdriver.

  • Remove the back cover of the controller.

Add Comment

Desolder the soldered joints that are connecting the headphone jack to the motherboard. This guide will show you how to solder and desolder connections.
  • Desolder the soldered joints that are connecting the headphone jack to the motherboard.

  • This guide will show you how to solder and desolder connections.

  • Remove the headphone jack and put it aside.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrea

Member since: 09/26/2017

401 Reputation

4 Guides authored

Team

USF Tampa, Team S14-G4, Boczar Fall 2017 Member of USF Tampa, Team S14-G4, Boczar Fall 2017

USFT-BOCZAR-F17S14G4

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 11

Past 30 Days: 38

All Time: 135