Parts

No parts required.

Introduction

This is hidden prereq.

Image 1/1:
  • The handle to open your computer is located on top of the right side panel.

Add Comment

Image 1/2: Image 2/2:
  • Grab the circular handle and pull outward.

Add Comment

Image 1/1:
  • Your computer is now open and ready for repair.

Add Comment

Image 1/1:
  • This is your Power Mac G4's video adapter.

Add Comment

Image 1/1:
  • Start by removing the screw holding the card to the chassis as shown.

Add Comment

Image 1/1:
  • Before lifting the card out, this small plastic tab needs to be pulled back there by releasing it entirely.

Add Comment

Image 1/2: When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card. Image 2/2: When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card.
  • With the tab and screw removed, lift the card straight out.

  • When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Cameron Christensen

Member since: 01/20/2010

522 Reputation

3 Guides authored

Team

Cal Poly, Team 14-41, Regan Winter 2010 Member of Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 9

All Time: 3,591