Introduction

Replacing or adjusting the unresponsive buttons will allow you to use the phone properly if it seems that the buttons or stuck or damaged.

Parts

No parts required.

Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.
  • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

  • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

Add Comment

Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off! Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!
  • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

Add Comment

Remove the rubber keyboard.
  • Remove the rubber keyboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cali Nowak Credit

Member since: 09/02/2014

401 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 5

Past 30 Days: 10

All Time: 400