Introduction

Taking off the back of this phone will allow you to look at or replace all of the pieces inside this device. This is a prerequisite guide for any other replacement you would like to accomplish with your SoundStation.

Parts

No parts required.

Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.
  • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

  • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

Add Comment

Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off! Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!
  • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cali Nowak Credit

Member since: 09/02/2014

401 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 10

All Time: 439