Introduction

How to install a new film pack.

Image 1/1: The slide release is near the lower left corner towards the front of the camera.
  • Locate film door and slide release latch.

  • The slide release is near the lower left corner towards the front of the camera.

Add Comment

Image 1/1: The film door will pop open.
  • Slide side latch towards the front of camera.

  • The film door will pop open.

Add Comment

Image 1/1: Make sure the battery contacts on the film pack are facing down and in contact with the camera's contacts.
  • Insert film pack.

  • Make sure the battery contacts on the film pack are facing down and in contact with the camera's contacts.

Add Comment

Image 1/1:
  • Close film door by gently pushing it back into place.

Add Comment

Finish Line

One other person completed this guide.

Matthew Lessig

Member since: 01/20/2010

45 Reputation

3 Guides authored

Team

Cal Poly, Team 3-18, Maness Winter 2010 Member of Cal Poly, Team 3-18, Maness Winter 2010

CPSU-MANESS-W10S3G18

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 42

All Time: 8,657