Introduction

This guide will inform you on installing a new battery cartridge.

  • Please note that we did not have a battery cartridge to insert into the camera.
Open the bottom compartment of the camera by sliding the lever towards the opening. Open the bottom compartment of the camera by sliding the lever towards the opening. Open the bottom compartment of the camera by sliding the lever towards the opening.
  • Open the bottom compartment of the camera by sliding the lever towards the opening.

Add Comment

Remove old battery/ film cartridge from camera.
  • Remove old battery/ film cartridge from camera.

Add Comment

Follow the instructions that came with the new battery/ film cartridge to insert the new cartridge into the camera.
  • Follow the instructions that came with the new battery/ film cartridge to insert the new cartridge into the camera.

  • Close the battery compartment of the camera.

  • Note: The camera in this picture does not contain a battery.

Add Comment

Finish Line

9 other people completed this guide.

Doug Jimenez

Member since: 01/21/2010

343 Reputation

2 Guides authored

Team

Cal Poly, Team 16-31, Maness Winter 2010 Member of Cal Poly, Team 16-31, Maness Winter 2010

CPSU-MANESS-W10S16G31

4 Members

4 Guides authored

5 Comments

It worked but its expensive

Jessica diaz - Reply

I put new film in, it´s turning on, the flash is going off, but no film is coming out after the flash. What is the problem?

tristanmoeller2013 - Reply

nothing happened

new film installed

no sound

no flash

no action

eminickstone - Reply

Were is the batter located?

jessannmackinnon - Reply

So I have the camera but is it worth it to buy the film because what if it doesn't work and I have the film for nothing ??

Karla Corzo - Reply

Add Comment

View Statistics:

Past 24 Hours: 131

Past 7 Days: 1,054

Past 30 Days: 4,722

All Time: 94,225