Polaroid Cube Battery Replacement

Step 1 Battery

• Remove the SD card cover by twisting it using a Plastic Opening Tool
Step 2

• Use the Plastic Opening tool to pry off and remove the front cover.
Step 3
• Using a J00 head screwdriver, remove the four 3.27mm screws from the front of the camera near the lens.
Step 4
• Use the Plastic Opening Tool to pry open the shell of the camera.
• There are four latches, one at each corner, that you will need to detach.
Step 5
• Remove shell from top and bottom of camera.
Step 6
• Remove the rubber seal wrapped around the camera.
Step 7
• Remove the tape wrapped around the battery.
Step 8
• Using a J00 head screwdriver, unscrew the four 3.46mm screws from the top and bottom circuit board.
Step 9
• Use the plastic opening tool to remove the circuit board that the battery is connected to.
Step 10
• Gently remove the battery pin connector from the circuit board.

Author

with 3 other contributors

heath lamkin

Member since: 09/29/16

372 Reputation

1 Guide authored

Badges: 13

• 
• 
• 

+10 more badges

Team

IUPUI, Team 3-2, Harley Fall 2016 Member of IUPUI, Team 3-2, Harley Fall 2016

IUPUI-HARLEY-F16S3G2

4 Members

3 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview