Introduction

PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).


Please SUBSCRIBE to my channel ツ


More info about disassembling, you can find in

PlayStation 3 Slim Teardown

Video Overview

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    Add Comment

  2. Remove Power Supply.
    • Remove Power Supply.

    Add Comment

    • Separate cables, unscrew the screw and remove the Blu Ray drive.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  4. Add Comment

    • Remove the two very small phillips screws in each lower corner referenced by the red circles.

    Add Comment

    • Be careful with flex cables.

    Add Comment

    • Now you can remove the Laser Deck.

    Add Comment

    • Transfer two flex cables and 2x rubbers.

    Add Comment

  5. Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

12 other people completed this guide.

ZFix

Member since: 12/09/2013

160,173 Reputation

304 Guides authored

Team

Master Techs Member of Master Techs

Community

279 Members

758 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 9

Past 7 Days: 43

Past 30 Days: 176

All Time: 15,629