Introduction

Use this guide if your macroline or regulator broke or you chose to upgrade your regulator. Removing these parts also allows access to more of the marker's internal parts.

Firmly grasp hold of the ring on the bottom of the 90 degree silver fitting on the front of the gun. Pull hard, but slowly, on the macroline where it comes out of silver piece until it comes out.
  • Firmly grasp hold of the ring on the bottom of the 90 degree silver fitting on the front of the gun.

  • Pull hard, but slowly, on the macroline where it comes out of silver piece until it comes out.

  • The macroline is the black hose connecting the regulator to the tank connection.

Add Comment

Remove the regulator by unscrewing it in a clockwise direction. Remove the regulator by unscrewing it in a clockwise direction.
  • Remove the regulator by unscrewing it in a clockwise direction.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Jared Olson

Member since: 10/14/2014

205 Reputation

2 Guides authored

Team

Cal Poly, Team 10-42, Amido Fall 2014 Member of Cal Poly, Team 10-42, Amido Fall 2014

CPSU-AMIDO-F14S10G42

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 598