Parts

No parts required.

Introduction

Use this guide to remove the back panel of the Photive Rain. Removing the back panel is necessary to access any of the speaker's internal components.

Image 1/1: Pull the suction cup from its groove in the back of the apeaker. Twist and turn the suction cup as needed to remove it.
  • Power off the speaker before beginning disassembly.

  • Pull the suction cup from its groove in the back of the apeaker. Twist and turn the suction cup as needed to remove it.

Add Comment

Image 1/1: Remove the back panel.
  • Remove the four 8.5 mm screws from the back panel of the speaker.

  • Remove the back panel.

  • Pull the back panel away carefully. The battery and speaker are both wired directly to the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Shozaf Zaidi

Member since: 02/15/2016

723 Reputation

4 Guides authored

Team

IUPUI, Team 1-4, Harley Spring 2016 Member of IUPUI, Team 1-4, Harley Spring 2016

IUPUI-HARLEY-S16S1G4

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 123