Parts

No parts required.

Peel the lining back on the top of the camera.
  • Peel the lining back on the top of the camera.

  • The lining is glued down to the device, you will have to peel the lining back using tweezers. After you are finished with your work you will have to use glue or adhesive to re-stick the lining back to the device.

Add Comment

Using tweezers pull straight up to remove the 2 rubber button toppers
  • Using tweezers pull straight up to remove the 2 rubber button toppers

Add Comment

Remove the 3, 2 mm screws under the rubber buttons.
  • Remove the 3, 2 mm screws under the rubber buttons.

Add Comment

Replace the shutter/power button or button component.
  • Replace the shutter/power button or button component.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Allison Merdian

Member since: 03/05/2015

401 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 290