Skip to main content

Introduction

Use this guide to replace the power and shutter buttons of the Pentax Optio WG-2.

Parts

No parts specified.

  1. Use your finger to peel the grip off the top of the camera.
    • Use your finger to peel the grip off the top of the camera.

    • For best results, start from the right side of the camera, opposite from the buttons.

    • Once the grip is removed, you will most likely lose the water-tight seal.

  2. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  3. Use the tweezers to remove the two buttons from the top of the camera.
    • Use the tweezers to remove the two buttons from the top of the camera.

    • The buttons may fall out while removing the grip.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Bessette

Member since: 03/04/2016

658 Reputation

6 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 157