Skip to main content

Introduction

The Pebble Time comes equipped with a spring loaded rubber strap. This guide will show the steps necessary to remove the strap for replacement with any 22mm spring loaded strap.

Parts

No parts specified.

  1. Pebble Time Watch Strap Replacement, Watch Strap: step 1, image 1 of 1
    • Locate the spring latch components on the back of the watch strap.

  2. Pebble Time Watch Strap Replacement: step 2, image 1 of 2 Pebble Time Watch Strap Replacement: step 2, image 2 of 2
    • Insert the metal spudger tool into the outer edge of the latch component.

    • Hold the watch securely and press the spring latch component towards you with the metal spudger tool.

  3. Pebble Time Watch Strap Replacement: step 3, image 1 of 2 Pebble Time Watch Strap Replacement: step 3, image 2 of 2
    • Remove the strap from the watch.

    • Repeat all steps on the opposite strap.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicolas Hempe

Member since: 02/15/2017

1,316 Reputation

5 Guides authored

Team

USF Tampa, Team 1-3, Sullivan Spring 2017 Member of USF Tampa, Team 1-3, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G3

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 15

All Time: 322