Introduction

This guide demonstrates how to remove and replace a Pandigital Super Nova battery and preserve the function of your device.

Remove the screw covers from each corner of the back side of the device.
  • Remove the screw covers from each corner of the back side of the device.

  • Set aside.

Add Comment

Using a Philips screwdriver, remove all four .15 mm screws from each corner.
  • Using a Philips screwdriver, remove all four .15 mm screws from each corner.

  • Set aside.

Add Comment

  • Using the plastic opening tool, remove the back cover of the device.

Add Comment

  • Remove the three .11 mm screws that hold the battery in place.

  • Set aside.

Add Comment

  • Unplug the battery and remove from device.

    • Avoid touching the motherboard as it is fragile.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

pfcprice

Member since: 10/10/2016

101 Reputation

1 Guide authored

Team

Texas Tech, Team 1-2, Bennett Fall 2016 Member of Texas Tech, Team 1-2, Bennett Fall 2016

TTU-BENNETT-F16S1G2

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 138