Skip to main content
  1. Remove the black 4 mm screw located on the back of the camcorder under the SD card slot. Remove the black 4 mm screw located on the back of the camcorder under the SD card slot.
    • Remove the black 4 mm screw located on the back of the camcorder under the SD card slot.

  2. There is a small copper ribbon on the right side of the device. Pull gently with the tweezers upward from the right side to get the copper ribbon free.
    • There is a small copper ribbon on the right side of the device. Pull gently with the tweezers upward from the right side to get the copper ribbon free.

  3. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  4. Unscrew the silver 4 mm screw from on top of the camcorder.
    • Unscrew the silver 4 mm screw from on top of the camcorder.

  5. Pry upwards on the front cover from the top of the device and with your other hand pull straight out on the front of the device (The front cover will be detached and free). Pry upwards on the front cover from the top of the device and with your other hand pull straight out on the front of the device (The front cover will be detached and free).
    • Pry upwards on the front cover from the top of the device and with your other hand pull straight out on the front of the device (The front cover will be detached and free).

  6. Remove the 6 mm screw on the top of the metal casing which was under the front cover.
    • Remove the 6 mm screw on the top of the metal casing which was under the front cover.

  7. Pull the metal casing straight off (The metal casing will be detached from the rest of the device).
    • Pull the metal casing straight off (The metal casing will be detached from the rest of the device).

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 14