Introduction

This guide will show you how to remove all of the exterior panels of the camera in order to remove and replace the LCD screen panel.

  1. Remove all four screws from side panels.
    • Remove all four screws from side panels.

  2. Remove two screws from the bottom of the back panel and remove the back panel as shown in the picture.
    • Remove two screws from the bottom of the back panel and remove the back panel as shown in the picture.

    • Remove screen from mounting bracket and slide the wiring from the board connection.

    • Reconnect the new screen wiring into the motherboard as shown in the picture and replace the new screen into the mounting bracket.

    • Replace the front panel and install the screws on the bottom side of the camera.

    • Replace the side panels and replace all four screws to secure the side panels.

    • This is what your newly replaced screen should look like.

Conclusion

Now you have a new screen for your Panasonic DMC-ZS8.

6 other people completed this guide.

Trevor Meyers

Member since: 03/03/2015

356 Reputation

2 Guides authored

One Comment

Where do I buy the new screen in the UK? I have been searching online, but not found one for my DMC-TZ70

Bernard Spence - Reply

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 1,774