Panasonic KX-TGA410C Keypad Replacement

Introduction

If your Panasonic KX-TGA410C handset’s keypad is not working as intended, or worn out and the numbers are no longer visible, use this guide to replace the button pad.

What you need

Step 1 Keypad

Panasonic KX-TGA410C Keypad Replacement, Keypad: step 1, image 1 of 3

Panasonic KX-TGA410C Keypad Replacement, Keypad: step 1, image 2 of 3

Panasonic KX-TGA410C Keypad Replacement, Keypad: step 1, image 3 of 3

Slide the battery cover in a downwards motion to uncover the batteries.
Use the indentation on the case.

Edit

Step 2

Remove the batteries by pulling them forward.

Edit

Step 3

Panasonic KX-TGA410C Keypad Replacement: step 3, image 3 of 3

Use a Phillips #00 screwdriver and remove two 6.4 mm screws.
The screws are at the bottom right and left-hand corner.

Edit

Step 4

Take an opening tool or pick and slide it in between the back and front cover all the way around the phone, then pull the back case off.

Edit

Step 5

Use a Phillips #00 screwdriver to remove one 6.4 mm screw from the top left corner of the phone.

Edit

Step 6

Gently pull the circuit board back.

Edit

Step 7

Pull the button pad out.

Edit

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Mumtaaz Mohamoud

Member since: 09/15/21

145 Reputation

1 Guide authored

Badges: 2

Team

York University, Team E-16, Melo-Thaiss Fall 2021 Member of York University, Team E-16, Melo-Thaiss Fall 2021

YORK-MELO-THAISS-F21SEG16

1 Member

1 Guide authored

Panasonic KX-TGA410C Keypad Replacement

Introduction

What you need

Step 1 Keypad

Add Comment

Step 2

Add Comment

Step 3

Add Comment

Step 4

Add Comment

Step 5

Add Comment

Step 6

Add Comment

Step 7

Add Comment

Author

Mumtaaz Mohamoud

Team

York University, Team E-16, Melo-Thaiss Fall 2021 Member of York University, Team E-16, Melo-Thaiss Fall 2021

0 Comments

Add Comment

Embed this guide

Preview