Introduction

Using this guide, a Panasonic HDC-TM15 owner will be able to remove the broken side cover of the camcorder and replace it with a new one.

Parts

No parts required.

Image 1/1:
  • Using the Phillips #00 Screwdriver, unscrew the five .5 mm Phillips #00 screws on the hand-strap side of the camcorder.

Add Comment

Image 1/1:
  • Next, unscrew the six .5 mm Phillips #00 screws on the bottom of the camcorder.

Add Comment

Image 1/3: Once the old cover is completely detached, set it aside. Image 2/3: The inside of your camcorder should now be completely exposed, as seen in the photos. Image 3/3: The inside of your camcorder should now be completely exposed, as seen in the photos.
  • By putting your hand through the hand-strap, tug on the side cover until it comes off completely.

  • Once the old cover is completely detached, set it aside.

  • The inside of your camcorder should now be completely exposed, as seen in the photos.

Add Comment

Image 1/2: Re-screw the side cover into place. Image 2/2: Re-screw the side cover into place.
  • Line up the new side cover in the exact same place, ensuring that the screw holes match.

  • Re-screw the side cover into place.

Add Comment

Image 1/1: When the side cover is securely fastened, you have completed the side cover replacement of your Panasonic HDC-TM15 camcorder.
  • Gently tug on the hand-strap to ensure that the screws are tight and the side cover is secure.

  • When the side cover is securely fastened, you have completed the side cover replacement of your Panasonic HDC-TM15 camcorder.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tricia Fallo

Member since: 03/11/2015

210 Reputation

2 Guides authored

Team

Marist, Team 1-4, Laflen Spring 2015 Member of Marist, Team 1-4, Laflen Spring 2015

MARS-LAFLEN-S15S1G4

3 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 137