Introduction

Over time batteries can lose their ability to maintain a charge. This guide demonstrates how to replace the battery.

Parts

No parts required.

Remove foil head and blades.
  • Remove foil head and blades.

Add Comment

Remove (2) 7.9mm Phillips #0 screws.
  • Remove (2) 7.9mm Phillips #0 screws.

  • Remove (2) 14.3mm Phillips #0 screws.

Add Comment

  • Push the blade mount assembly towards the rear of razor and remove.

Add Comment

  • Be careful not to break any tabs that hold the panels to the body.

  • Remove both external panels using spudger if necessary.

Add Comment

  • Remove (2) 7.9mm Phillips #0 screws.

Add Comment

  • This step may require a fair amount of force due to the O-ring.

  • Pull to separate the end-cap from the body.

Add Comment

  • Remove (2) 7.9mm Phillips #0 screws and remove endcap from frame.

Add Comment

  • Push forward on the lower terminal to remove the battery from the frame.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Kevin Marvell

Member since: 11/06/2017

228 Reputation

2 Guides authored

Team

IUPUI, Team S6-G5, Baechle Fall 2017 Member of IUPUI, Team S6-G5, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G5

3 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 13

All Time: 86