Image 1/1:
  • Unscrew the two 7.35mm Torx T6 screws.

Add Comment

Image 1/1:
  • Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.

Add Comment

Image 1/1:
  • Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.

Add Comment

Image 1/1:
  • Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Antonio

Member since: 01/23/2011

101 Reputation

1 Guide authored

Team

Cal Poly, Team 5-21, Amido Winter 2011 Member of Cal Poly, Team 5-21, Amido Winter 2011

CPSU-AMIDO-W11S5G21

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 1,191