Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

Add Comment

Use the small notch on the left hand side of the phone to remove the battery. Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

Add Comment

Remove the stylus from the phone.
  • Remove the stylus from the phone.

Add Comment

After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)
  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

Add Comment

Using the spudger, remove the small rubberized patch under the antenna.
  • Using the spudger, remove the small rubberized patch under the antenna.

Add Comment

Unscrew the last two screws using the previous screw driver.
  • Unscrew the last two screws using the previous screw driver.

Add Comment

Using the plastic opening tool, gently separate the back case from the phone body. Using the plastic opening tool, gently separate the back case from the phone body.
  • Using the plastic opening tool, gently separate the back case from the phone body.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

James Smith

Member since: 04/27/2012

1 Reputation

3 Guides authored

Team

Cal Poly, Team 12-37, Regan Spring 2012 Member of Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 561