Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Palm Pre Antenna Replacement

Views: 570

View statistics:

Past 24 Hours:
0
Past 7 Days:
3
Past 30 Days:
7
All Time:
570
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: No estimate
Difficulty: Moderate
Archived Guide

This guide is retained solely for historical purposes. Use the updated version of the guide to perform your repair.

Mismatched Prerequisites

This guide does not have a proper prerequisite guide. Help match it to its ideal partner by finding it or writing one!

Confusing Text

Some of this guide's text is confusing, duplicated, or off-topic. Clarify it by editing!

Community-Contributed Guide

An awesome member of our community made this guide. It was not created by iFixit staff.

Palm Pre Antenna Replacement

Introduction

Go to step 1 ↓

If you are having trouble connecting to the internet or calling someone, there may be a problem with the connections between the antenna and the phone or a problem with the antenna itself. This guide can help with these problems.

What you need

Tools

  • Spudger
    4.9
  • T5 Torx Screwdriver
    4.9
    1. Palm Pre Antenna Replacement, Antenna: step 1, image 1 of 2 Palm Pre Antenna Replacement, Antenna: step 1, image 2 of 2
      • First the back panel must be removed to reveal the battery.

      • Remove the battery pack.

      Ask FixBot

      Add Comment

    2. Palm Pre Antenna Replacement: step 2, image 1 of 2 Palm Pre Antenna Replacement: step 2, image 2 of 2
      • Remove the six T5 screws necessary to separate the backplate from the phone.

      • There is one screw in the upper right that is concealed by a small sticker labeled "Palm."

      • Additionally, there are interlocking tabs securing the back plate around the edges.

      • Use the opening tool to carefully go around the phone releasing these tabs.

      Ask FixBot

      Add Comment

    3. Palm Pre Antenna Replacement: step 3, image 1 of 2 Palm Pre Antenna Replacement: step 3, image 2 of 2
      • Lift the metal flap marked in red to reveal the antenna connectors.

      • Carefully pry these the antennas from their connections, this can be done quite easily.

      • Take note of which colored wire is attached to each connection. The white wire corresponds to GPS, while the black wire corresponds to DIV, or diversity antenna.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with

iDeleted

Member since: 07/07/10

2,101 Reputation

39 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 7

All Time: 570