Parts

No parts required.

Introduction

Be careful with the screen if cracked, it may have sharp pieces.

Image 1/1:
  • Unscrew the three screws on the back of the Palm Pilot.

Add Comment

Image 1/2: Image 2/2:
  • Pull the back cover from the bottom of the device and separate the interlocking tabs on the top to remove the back cover.

Add Comment

Image 1/1:
  • The front plastic cover is now free to be removed from the rest of the device.

Add Comment

Image 1/1:
  • The keypad is now free to be removed from the rest of the device.

Add Comment

Image 1/1:
  • Looking at the back of the device hold one of the white tabs on the ribbon cable connector down and use tweezers to push in the other white tab toward the device at the same time.

Add Comment

Image 1/1:
  • The ribbon cable is now loose. Use the tweezers to carefully slide the ribbon cable out of the connector.

Add Comment

Image 1/2: Image 2/2:
  • The screen is now disconnected from the rest of the device and can now be removed.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin Santos

Member since: 03/09/2012

1 Reputation

4 Guides authored

Team

Clemson, Team 2-4, Benson Spring 2012 Member of Clemson, Team 2-4, Benson Spring 2012

CLEM-BENSON-S12S2G4

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 1,017