Pacific Image Electronics CS3600 Screen Replacement
Alessia Carlton and 2 other contributors
Last updated on May 26, 2017
Views: 653
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 18
- Past 30 Days:
- 90
- All Time:
- 653
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
Introduction
Go to step 1 ↓This guide will show you have to remove the viewing screen from the front of the scanner if the screen breaks, or is no longer transparent.
What you need
Tools
-
-
-
To start, open the device by removing the 5, 5mm x 9mm screws, with a J1 screwdriver.
Ask FixBot
-
-
-
-
Push the screen away from the scanner from the inside with light force until it is no longer attached.
-
Replace with a new screen.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Texas Tech, Team S46-G2, Bennett Spring 2017 Member of Texas Tech, Team S46-G2, Bennett Spring 2017
TTU-BENNETT-S17S46G2
3 Members
60 Guides authored
