That's my PSP. As you can see, the UMD door it's broken. It fell down when I was playing. That's the part where the screws are located. You must move away the battery before doing nothing. We must unscrew the screws marked with colour blue.
  • That's my PSP. As you can see, the UMD door it's broken. It fell down when I was playing.

  • That's the part where the screws are located. You must move away the battery before doing nothing.

  • We must unscrew the screws marked with colour blue.

  • Remind to keep safe the screws, because you can loose them!

Add Comment

After unscrew the screws we can move away the front case.
  • After unscrew the screws we can move away the front case.

  • This is the button board. In my case it's damaged.

Add Comment

This is one of the two clips which the button board has. With an oppener tool you should release it. Be careful with this ribbon cabble! Be careful with this ribbon cabble!
  • This is one of the two clips which the button board has. With an oppener tool you should release it.

  • Be careful with this ribbon cabble!

Add Comment

Lift the latch open, away from the ribbon cable. Pull the cable away from the latch, and we are done! Be careful with the latch because it brakes easily!
  • Lift the latch open, away from the ribbon cable.

  • Pull the cable away from the latch, and we are done! Be careful with the latch because it brakes easily!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Javi

Member since: 02/22/2013

227 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 15

All Time: 1,111