Fix Your Stuff Community Store

PDP Victrix Gambit Prime Wired Tournament Controller Directional Pad Replacement

Introduction

Whether you would like to replace the directional pad because it is broken, or change the way you play, below are the necessary steps to change the directional pad.

What you need

  1. PDP Victrix Gambit Prime Wired Tournament Controller Directional Pad Replacement, Directional Pad: step 1, image 1 of 1

    • Insert an opening tool in the gap between the rear and front case.

    • Pry around the perimeter until the front case releases.

    • Remove the front case.

    Edit

  3. PDP Victrix Gambit Prime Wired Tournament Controller Directional Pad Replacement: step 2, image 1 of 1

    • Insert an opening tool under the directional pad, and gently apply pressure to pop it off.

    Edit

  4. PDP Victrix Gambit Prime Wired Tournament Controller Directional Pad Replacement: step 3, image 1 of 2 PDP Victrix Gambit Prime Wired Tournament Controller Directional Pad Replacement: step 3, image 2 of 2

    • Replace the old directional pad with the new one; press down firmly until it clicks into place.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 15

All Time: 166