Fix Your Stuff Community Store

PDP Victrix Gambit Prime Wired Tournament Controller Bumper Replacement

Introduction

Replacing or making repairs to your controller's bumpers can prove to be quite difficult. We have provided clear instructions below to show you how to remove the case, separate the motherboards, and remove the bumpers, to ensure a more concise process.

What you need

  1. PDP Victrix Gambit Prime Wired Tournament Controller Bumper Replacement, Bumpers: step 1, image 1 of 1

    • Insert an opening tool in the gap between the rear and front case.

    • Pry around the perimeter until the front case releases.

    • Remove the front case.

    Edit

  2. PDP Victrix Gambit Prime Wired Tournament Controller Bumper Replacement: step 2, image 1 of 2 PDP Victrix Gambit Prime Wired Tournament Controller Bumper Replacement: step 2, image 2 of 2

    • Remove all seven 9 mm Phillips #000 screws securing the midframe.

    • Remove the midframe.

    Edit

  4. PDP Victrix Gambit Prime Wired Tournament Controller Bumper Replacement: step 3, image 1 of 1

    • Gently remove the two 6 mm Phillips #00 screws that secure the PCB.

    Edit

  5. PDP Victrix Gambit Prime Wired Tournament Controller Bumper Replacement: step 4, image 1 of 2 PDP Victrix Gambit Prime Wired Tournament Controller Bumper Replacement: step 4, image 2 of 2

    • Remove the four 6 mm Phillips #000 screws that secure the trigger assemblies.

    • Remove the trigger assemblies.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 10

Past 30 Days: 49

All Time: 858