Image 1/3: Simply gently tug on the pad until it comes free from the slot which is marked by the red square. Image 2/3: Simply gently tug on the pad until it comes free from the slot which is marked by the red square. Image 3/3: Simply gently tug on the pad until it comes free from the slot which is marked by the red square.
  • Start by removing the right ear pad. Be careful not to pull too hard as it may rip.

  • Simply gently tug on the pad until it comes free from the slot which is marked by the red square.

Add Comment

Image 1/3: Gently pull it out from the slot taking care not to rip it. Image 2/3: Gently pull it out from the slot taking care not to rip it. Image 3/3: Gently pull it out from the slot taking care not to rip it.
  • Next remove the left earpad. Do this in the same way as you removed the right side.

  • Gently pull it out from the slot taking care not to rip it.

Add Comment

Image 1/2: You may now continue with a more complex inner headset repair, or replace the ear pads by sliding new ones into the slots. Image 2/2: You may now continue with a more complex inner headset repair, or replace the ear pads by sliding new ones into the slots.
  • Your headset should now look like this, with the two ear pads removed.

  • You may now continue with a more complex inner headset repair, or replace the ear pads by sliding new ones into the slots.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Thomas Williams

Member since: 10/22/2015

428 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 12

Past 30 Days: 66

All Time: 1,114