Introduction

Using this guide, you will be able to open your Oregon Scientific Meep! and remove your faulty battery, which can be replaced with a new one.

Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
  • Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

Add Comment

Use a plastic opening tool to detach the clips on the inside of the device.
  • Use a plastic opening tool to detach the clips on the inside of the device.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the black tape holding the battery in place.
  • Remove the black tape holding the battery in place.

Add Comment

Use a spudger to separate the battery from its adhesive.
  • Use a spudger to separate the battery from its adhesive.

Add Comment

Use a soldering station to separate the battery from its connecting wires. Use a soldering station to separate the battery from its connecting wires.
  • Use a soldering station to separate the battery from its connecting wires.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jess Forte

Member since: 09/25/2015

419 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 10

All Time: 216