Optoma HD72 Upper Case Replacement
Last updated on Jun 25, 2024
Views: 264
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 9
- Past 30 Days:
- 43
- All Time:
- 264
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Use this guide to replace the upper case on an Optoma HD72 projector.
What you need
Tools
-
-
-
Use a Phillips screwdriver to remove the five 2 mm screws on the underside of the device.
Ask FixBot
-
-
-
-
Flip the device over and slightly lift the upper case, with care not to strain the two cables.
-
Disconnect the two cables that connect the top case to the motherboard.
-
Lift the upper case up and off.
-
-
To reassemble your device, follow these instructions in reverse order.
