Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Opening the Computer (2006-2008)

Views: 11K

View statistics:

Past 24 Hours:
5
Past 7 Days:
32
Past 30 Days:
140
All Time:
11,462
Comments: 4

2 comments on steps, 2 guide comments.

Go to guide comments
Completed: 13

13 people have marked this guide "completed." Will you be next?

Favorites: 3

3 people have favorited (and subscribed to) this guide. Will you be next?

Time Required: 5 minutes
Difficulty: Very easy
Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Community-Contributed Guide

An awesome member of our community made this guide. It was not created by iFixit staff.

Opening the Computer (2006-2008)

Introduction

Go to step 1 ↓

First step in most Mac Pro guides. Opening the Computer.

What you need

Tools

    1. Opening the Computer (2006-2008), Opening the Computer (2006-2008): step 1, image 1 of 2 Opening the Computer (2006-2008), Opening the Computer (2006-2008): step 1, image 2 of 2
      • Shut down the computer.

      • Warning: Always shut down the computer before opening it to avoid damaging its internal components or the components you are installing. Do not open the computer or attempt to install items inside it while it is on.

      • Wait 5 to 10 minutes to allow the computer’s internal components to cool.

      • Warning: After you shut down the system, the internal components can be very hot. You must let the computer cool down before continuing.

      • Unplug all external cables from the computer except the power cord.

      • Touch the metal PCI access covers on the back of the computer to discharge any static electricity from your body.

      • Unplug the power cord.

      • Put on an ESD wrist strap.

      Ask FixBot

      Add Comment

    2. Opening the Computer (2006-2008): step 2, image 1 of 1
      • 1) Hold the side access panel and lift the latch on the back of the computer.

      • Warning: The edges of the access panel and the enclosure can be sharp. Be very careful when handling them.

      • 2) Remove the access panel and place it on a flat surface covered by a soft, clean cloth.

      • Replacement Note: Make sure the latch is in the up position before replacing the access panel. If the latch is down, the access panel will not seat correctly in the enclosure.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

13 other people completed this guide.

Author

with

Joshua Byrne

Member since: 05/03/13

7,896 Reputation

10 Guides authored

2 Guide Comments

Do you have information on  Mac Pro Tower 2008 latch mechanism replacement #.

When can I buy this?

v h - Reply Share

Hola buenos días. Tengo una y soy de Venezuela me gustaría saber cómo conseguir este procesador Xeon x5492

Videos premium - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 32

Past 30 Days: 140

All Time: 11,462