Skip to main content

OnLogic CL100 mSATA SSD Replacement

What you need

    • If there are rubber feet on the bottom of the device, remove the feet.

    • Remove the 4 screws on the bottom of the device.

    • After removing the orange pad, remove the screw holding the SSD in place and slide it right, then up.

    • While reassembling, align the SSD and slide it left.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

scx32

Member since: 02/26/23

159 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 53