Skip to main content

Omaker M4 Motherboard Replacement

What you need

  1. Omaker M4 Motherboard Replacement, Back Case: step 1, image 1 of 1
    • Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface

  2. Omaker M4 Motherboard Replacement: step 2, image 1 of 2 Omaker M4 Motherboard Replacement: step 2, image 2 of 2
    • Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.

  3. Omaker M4 Motherboard Replacement: step 3, image 1 of 2 Omaker M4 Motherboard Replacement: step 3, image 2 of 2
    • Use a magnet to remove the screws after unscrewing them and place them aside.

  4. Omaker M4 Motherboard Replacement: step 4, image 1 of 1
    • Carefully remove the back cover without breaking the battery wire.

  5. Omaker M4 Motherboard Replacement: step 5, image 1 of 2 Omaker M4 Motherboard Replacement: step 5, image 2 of 2
    • Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.

    • The battery is still attached to the back cover.

  6. Omaker M4 Motherboard Replacement, Motherboard: step 6, image 1 of 2 Omaker M4 Motherboard Replacement, Motherboard: step 6, image 2 of 2
    • Remove the mic wire by carefully pulling the plug out of the socket.

  7. Omaker M4 Motherboard Replacement: step 7, image 1 of 1
    • Remove the speaker wire by carefully pulling the plug out of the socket on the motherboard.

  8. Omaker M4 Motherboard Replacement: step 8, image 1 of 2 Omaker M4 Motherboard Replacement: step 8, image 2 of 2
    • Use Phillips PH00 screwdriver to remove the three screws holding the motherboard in place.

  9. Omaker M4 Motherboard Replacement: step 9, image 1 of 2 Omaker M4 Motherboard Replacement: step 9, image 2 of 2
    • Remove the screws using the screwdriver.

    • Since the screws that hold the motherboard in place are smaller, the screwdriver is able to pick them up.

  10. Omaker M4 Motherboard Replacement: step 10, image 1 of 2 Omaker M4 Motherboard Replacement: step 10, image 2 of 2
    • Carefully remove the motherboard with your hand by lifting it from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

[deleted]

Member since: 02/17/16

679 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 1,143