Introduction

Are the top buttons on your camera not working properly? This guide will show how to replace the ON/OFF button, shutter button, and the zoom button.

Image 1/1:
  • Orient camera to look directly at battery compartment side as shown.

Add Comment

Image 1/3: First, move the "lock" switch left to reveal red indicator. Image 2/3: Next, move the "cover latch" switch downward to reveal red indicator. Image 3/3: You have to move the switches in that order for the compartment to unlatch.
  • Locate the two latches on the battery compartment.

  • First, move the "lock" switch left to reveal red indicator.

  • Next, move the "cover latch" switch downward to reveal red indicator.

  • You have to move the switches in that order for the compartment to unlatch.

Add Comment

Image 1/2: Insert battery with the writing face up. Image 2/2: The bigger slot is for the battery. The smaller slot is for the memory card.
  • Allow the battery compartment latch to completely open.

  • Insert battery with the writing face up.

  • The bigger slot is for the battery. The smaller slot is for the memory card.

  • Battery not shown.

Add Comment

Image 1/1: Remove the three 3.85mm Phillips #00 screws from the bottom of the camera.
  • Orient the camera so you are looking at the bottom.

  • Remove the three 3.85mm Phillips #00 screws from the bottom of the camera.

Add Comment

Image 1/1: Remove the two 3.15mm Phillips #00 screws from the side plate of the camera.
  • Orient the camera so you are looking at the side plate.

  • Remove the two 3.15mm Phillips #00 screws from the side plate of the camera.

Add Comment

Image 1/2: Remove the two 3.8mm with the Phillips H1.5 from the front plate. Image 2/2: Remove the "Olympus" plate.
  • Orient the camera so you are looking at the front plate.

  • Remove the two 3.8mm with the Phillips H1.5 from the front plate.

  • Remove the "Olympus" plate.

Add Comment

Image 1/1:
  • Remove face plate.

Add Comment

Image 1/3: Remove the 3.85mm Phillips #00 screw on the far left side. Image 2/3: Remove the two 5mm Phillips #00 screws on the right side Image 3/3: Remove the two 5mm Phillips #00 screws on the right side
  • Locate three small black screws inside of the battery compartment.

  • Remove the 3.85mm Phillips #00 screw on the far left side.

  • Remove the two 5mm Phillips #00 screws on the right side

Add Comment

Image 1/3: Remove the 5.4mm Phillips #00 screw on the top left side. Image 2/3: Remove the 7.4mm Phillips #00 screw next to the "ON/OFF" label. Image 3/3: Pry off top button plate with black nylon spudger.
  • Orient the camera to be look at the top.

  • Remove the 5.4mm Phillips #00 screw on the top left side.

  • Remove the 7.4mm Phillips #00 screw next to the "ON/OFF" label.

  • Pry off top button plate with black nylon spudger.

Add Comment

Image 1/2: Wedge black nylon spudger in between bottom latch and camera base to release LCD Screen from camera. Image 2/2: Push firmly apart.
  • Rotate to bottom of camera and locate bottom latch.

  • Wedge black nylon spudger in between bottom latch and camera base to release LCD Screen from camera.

  • Push firmly apart.

  • Some buttons might fall out.

Add Comment

Image 1/3: Locate the white ribbon cable and pull out from motherboard. Image 2/3: Locate the brown ribbon cable and pull out from motherboard. Image 3/3: Locate the brown ribbon cable and pull out from motherboard.
  • Orient the camera to the LCD screen side that is now wedged open.

  • Locate the white ribbon cable and pull out from motherboard.

  • Locate the brown ribbon cable and pull out from motherboard.

Add Comment

Image 1/3: Remove the one small black 2mm Phillips #00 screw. Image 2/3: Remove silver button plate from camera base. Image 3/3: Buttons may come loose
  • Remove the two 3mm Phillips #00 screws.

  • Remove the one small black 2mm Phillips #00 screw.

  • Remove silver button plate from camera base.

  • Buttons may come loose

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Larissa Knight

Member since: 03/21/2016

549 Reputation

5 Guides authored

Team

Clemson, Team 7-2, Benson Spring 2016 Member of Clemson, Team 7-2, Benson Spring 2016

CLEM-BENSON-S16S7G2

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 134