Introduction

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

Remove nine 4.45mm Phillips #000 screws from the outside of the case. Remove nine 4.45mm Phillips #000 screws from the outside of the case.
  • Remove nine 4.45mm Phillips #000 screws from the outside of the case.

Add Comment

There are four screws to take out on the bottom of the camera.
  • There are four screws to take out on the bottom of the camera.

Add Comment

There are three screws to take out on this side.
  • There are three screws to take out on this side.

Add Comment

There is one screw to take out on this side.
  • There is one screw to take out on this side.

Add Comment

There is one hidden screw inside the HDMI port.
  • There is one hidden screw inside the HDMI port.

Add Comment

Using the blue plastic opening tool, wedge open and remove the case.
  • Using the blue plastic opening tool, wedge open and remove the case.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Samuel Hays

Member since: 03/13/2017

491 Reputation

4 Guides authored

Team

, Team S1-G1, Sobiech Spring 2017 Member of , Team S1-G1, Sobiech Spring 2017

CNU-SOBIECH-S17S1G1

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 59