Introduction

We will show how to tear down to and remove the LCD screen.

Image 1/2: Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1). Image 2/2: Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).
  • Unscrew all immediately visible screws on the body of the camera.

  • Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use the plastic opening tool to separate the back cover from the camera.

Add Comment

Image 1/3: Unscrew both of these screws. Image 2/3: Unscrew both of these screws. Image 3/3: Unscrew both of these screws.
  • With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen.

  • Unscrew both of these screws.

Add Comment

Image 1/1:
  • Flip the LCD screen over.

Add Comment

Image 1/1:
  • Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.

Add Comment

Image 1/2: Image 2/2:
  • Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • The LCD screen housing should now be free of the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

GradStudents2011

Member since: 09/08/2011

12 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 906