Oculus Rift DK1 Control Box Bottom Cover Replacement - iFixit Repair Guide

15% Off Selected iFixit Tools — Limited Time
Free Shipping on Domestic Orders $75+

Introduction

This guide will teach you how to disassemble the control box of the Oculus Rift DK1.

What you need

Step 1 Control Box Bottom Cover

Oculus Rift DK1 Control Box Bottom Cover Replacement, Control Box Bottom Cover: step 1, image 1 of 3

Oculus Rift DK1 Control Box Bottom Cover Replacement, Control Box Bottom Cover: step 1, image 2 of 3

Oculus Rift DK1 Control Box Bottom Cover Replacement, Control Box Bottom Cover: step 1, image 3 of 3

Use a plastic opening tool to carefully pry off the four rubber feet from the control box.
You have now revealed the four 9 mm Phillips #1 screws underneath the rubber feet.

Ask FixBot

Step 2

Oculus Rift DK1 Control Box Bottom Cover Replacement: step 2, image 1 of 3

Oculus Rift DK1 Control Box Bottom Cover Replacement: step 2, image 2 of 3

Oculus Rift DK1 Control Box Bottom Cover Replacement: step 2, image 3 of 3

Use a Phillips #1 Screwdriver to unscrew the four 9mm Phillips screws on the bottom of the control box.
You can now remove the bottom lid of the control box. It should come apart easily.

Ask FixBot

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 6 other contributors

Audrey Chan

Member since: 01/12/15

201 Reputation

2 Guides authored

Team

Cal Poly, Team 70-5, Forte Winter 2015 Member of Cal Poly, Team 70-5, Forte Winter 2015

CPSU-FORTE-W15S70G5

4 Members

6 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 26

All Time: 674