Introduction

Replacing the battery is a fairly simple process. It consists of opening the device and removing the solder holding the battery's wires.

Parts

No parts required.

Place the plastic opening tool between the front and rear cover and pry up on each corner of the cover.
  • Place the plastic opening tool between the front and rear cover and pry up on each corner of the cover.

Add Comment

Deck the Halls
With tools and Fix Kits
Melt the solder on the red and black wires and remove wires.
  • Melt the solder on the red and black wires and remove wires.

Add Comment

Peel the battery from the front panel.  Be careful not to puncture the battery.
  • Peel the battery from the front panel. Be careful not to puncture the battery.

How do you get a battery to replace?

patrick luke - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathaniel Nasman

Member since: 03/23/2015

615 Reputation

5 Guides authored

Team

2 Comments

I need one battery for my nuvision tablet 10.1"

isidore junior - Reply

Did not say anything about the on/off & volume buttons.... What a pain !!!!!

Jim Sutton - Reply

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 71

Past 30 Days: 344

All Time: 7,186