Skip to main content

Introduction

This is a disassembly guide page that shows you how to open the device. It is an important part of any replacement process that we do here because once you have device open, you can replace any parts (Power Cable, Power Button, Heating Coil, Bowl).

Parts

No parts specified.

  1. Remove the two 1.3 mm Phillips #2 screws. Remove the S6 spanner screw.
    • Remove the two 1.3 mm Phillips #2 screws.

    • Remove the S6 spanner screw.

    • Carefully place these three screws somewhere safe to use later in reassembly.

  2. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  3. Split the device in half to expose the internal parts of the device.
    • Split the device in half to expose the internal parts of the device.

    • Again, there are two more Phillips screws to remove.

  4. Remove the two screws from both sides of the heating coil.
    • Remove the two screws from both sides of the heating coil.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Praful Busa

Member since: 06/25/2017

269 Reputation

2 Guides authored

Team

UW Tacoma, Team S1-G4, Liner Summer 2017 Member of UW Tacoma, Team S1-G4, Liner Summer 2017

UWT-LINER-SU17S1G4

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 27