Introduction

Use this guide to replace the stands on the bottom of the device if they are missing or damaged.

Tools

No tools required.

Unplug the device before following this guide. First, place the device on its side, making sure the switch is not facing down.
  • Unplug the device before following this guide.

  • First, place the device on its side, making sure the switch is not facing down.

  • Remove the eight 12mm Phillips #02 screws from the base.

Add Comment

Gently separate the panel from the device.
  • Gently separate the panel from the device.

  • Be sure not to tug at the wires that are still connected.

Add Comment

Deck the Halls
With tools and Fix Kits
Locate the four 10mm Phillips #02 screws on the inside of the panel.
  • Locate the four 10mm Phillips #02 screws on the inside of the panel.

Add Comment

Remove the screw of the foot you plan to replace. Place your finger on the back of the the foot you are unscrewing for support. Place your finger on the back of the the foot you are unscrewing for support.
  • Remove the screw of the foot you plan to replace.

  • Place your finger on the back of the the foot you are unscrewing for support.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Carlton

Member since: 01/13/2015

633 Reputation

5 Guides authored

Team

USF Tampa, Team 3-5, Hickman Winter 2015 Member of USF Tampa, Team 3-5, Hickman Winter 2015

USFT-HICKMAN-W15S3G5

5 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 160